It’s themed furniture day!
Every month a few of my blogger friends and I get together and create a makeover around our chosen theme.
This month’s theme is DECOUPAGE.
You can see previous month’s themes here –> Themed Furniture Tour
For this one, I decided to do a French Paper Decoupage.
Did you happen to catch the price??
FIVE dollars. Well, $5.25 to be exact. But hey, close enough!! ;)
It was originally round with two extensions on each side (thank you to my wonderful Facebook friends for the help there!!)
I guess someone decided they didn’t like them and removed them before it made it’s way to me?
Oh well, it’s a super cute table anyway.
But that did require me to do a bit of work to it though…..
I sanded the top lightly so none of the imperfections would show through the paper.
Then I screwed and glued the levers in on the sides so they’d be secure and smooth.
I used wood putty on the outside to make it seamless.
I had originally planned to paint the sides but really wanted those curves on the bottom to stand out.
I felt like they’d get lost if I just painted them all one color.
I’ve included affiliate links below for your convenience. See here for full disclosure.
So I decided to use decoupage there too.
So, to start I painted the top a light color similar to the paper….Old Ochre Chalk Paint.
The paper I used this time was TISSUE PAPER. Yep.
I wanted something really thin and found this paper at Michael’s.
It’s very delicate so a lot of care had to be taken so as not to tear or rip it when applying.
I used Mod Podge mixed with a very good amount of water. (no measurements…it just needs to be very fluid so it will be easier to work with under the thin paper)
Using a brush, layer a good amount over the entire top so it won’t dry too quickly when laying the paper down.
I used my little sqeegee thingy to oh-so-very lightly press it onto the top.
The paper was about an inch too short. Darn.
So I evened it out and added two other pieces on each side to fill in the extra space…..
…but it actually worked out much better than I thought it would. Can’t even tell.
Unless you know where to look.
The paper is so thin it ended up with “wrinkles” and I LOVE them! They are perfect for the whole look i was going for here.
You can see them really well in the photo below.
Another close up….
To trim around the top edge I used a very fine sandpaper and lightly rubbed along the edge.
It came right off! So easy.
(bet you can’t see where those little extra side pieces of paper are attached ;) well barely anyway)
For the sides I had to use an x-acto knife but that worked pretty easily too since I had a good edge to run along.
The Old Ochre was the perfect base underneath this paper. (it’s under all areas that are decoupaged)
For the legs I had originally planned to used Graphite Chalk Paint but it was not black enough.
I remembered I’d bought the “*Lamp Black ” from General Finishes Milk Paint line awhile back.
I’d never used it but knew it was a true black color.
And it was PERFECT!
That black is just fabulous….so smooth in application and afterwards.
I very much loved working with it.
I painted another little table with General Finishes Milk Paint awhile back and will definitely be picking up some more to try now.
For the top and sides (decoupage areas) I put 2 coats (drying well in between) of Minwax Polycrylic.
I’m all over the place with products on this project. ;)
Once the polycrylic and black paint was dry I applied one coat of Annie Sloan Clear Wax over the entire thing.
Buffed it up …and done!
What a difference a little paper and paint makes, right?
You know it’s a winner when your husband walks in at the end of the day and says it’s “the bomb”.
(he doesn’t usually say much without some prodding!)
Guess what….there are even more decoupage furniture makeovers for you down below!
Be sure to click on them to see the full posts. :)